The essential points from this guide -- each one is explained in detail below.
A dedicated mobile proxy reserves a single carrier IP for one account, unlike shared mobile pools that rotate the same IPs across many customers.
Private mobile proxies keep full CGNAT-level trust because the IP still routes through a real 4G or 5G carrier network.
A static mobile proxy holds one address for as long as your session needs it; a rotating 4G/5G proxy swaps addresses automatically.
KnoxProxy prices dedicated mobile proxies at $4.50/GB, above residential ($2.10/GB), ISP ($2.90/IP), and datacenter ($0.60/GB), reflecting the cost of reserved carrier hardware.
Dedicated mobile proxies work best for account management, ad verification, and other tasks where one blocked IP would end the whole session.
Shared mobile proxies pull from a rotating pool of carrier IPs that many customers use at the same time. One request from your account and the next request from a different customer might use the same IP within minutes. A dedicated mobile proxy removes that overlap. The carrier IP is reserved for your account alone, and no other customer's traffic touches it while your session is active.
This distinction matters most for reputation-sensitive work. Private mobile proxies let you build a clean, consistent history on one IP over days or weeks, the same way a real phone user would. Shared pools work fine for short scraping jobs where each request stands on its own, but they cannot support tasks like managing a social account, where a platform tracks the IP's behavior over time.
When people search for private mobile proxies or mobile proxies private, they are usually looking for exactly this setup: one IP, one account, full control over what happens to its reputation. Private mobile proxy plans cost more than shared plans because the provider sets aside a physical device, a SIM card on an active data plan, just for your account instead of splitting it across many customers. If your task does not depend on IP history, a shared mobile proxy or even a residential proxy will do the same job for less.
Every mobile proxy, dedicated or shared, connects through a real SIM card on a carrier's 4G or 5G network. The carrier assigns an IP address to that SIM through Carrier-Grade NAT (CGNAT), the same system it uses for ordinary phone customers. On a shared setup, the provider cycles the SIM's connection often, and the carrier hands out a new IP from its pool each time.
A dedicated 4g proxy setup works differently. The provider still uses a real SIM and carrier connection, but holds that connection open and assigns it to one account instead of rotating it through a queue of customers. The IP itself does not change unless the connection drops, the SIM reconnects, or you request a rotation through the provider's dashboard or API.
This is why a dedicated mobile proxy is not automatically a static one. The carrier can still reassign the IP if the device loses signal or restarts. Good providers minimize this by keeping dedicated devices on stable connections and offering a manual rotation endpoint, so you control when the IP changes instead of the carrier deciding for you. For more on how the underlying carrier connection behaves, see our guide to the 4G/LTE proxy.
Datacenter IPs are the easiest type for anti-bot systems to flag, since they come from known hosting ranges with no residential or mobile history behind them. Residential proxies fix that by routing through real home internet connections, but large residential networks still get fingerprinted once a provider's ranges become known to platforms. Dedicated mobile proxies sit above both because the IP shares a carrier's CGNAT pool with hundreds of ordinary phone users, and blocking it risks blocking real customers too.
That extra trust costs more. KnoxProxy's pricing lists dedicated mobile proxies at $4.50/GB, compared with $2.10/GB for residential and $0.60/GB for datacenter plans. For high-volume scraping of ordinary websites, that price gap is hard to justify, and a cheaper IP type will finish the job just as well.
The premium pays off on tasks where losing the IP means losing the account: running social media profiles at scale, verifying mobile ad placements, or checking sneaker release pages that block datacenter and residential ranges fast. Reserve dedicated mobile proxies for the targets that reject cheaper IP types first, and use residential or datacenter IPs everywhere else.
A static mobile proxy holds the same carrier IP for the length of your session, which can run for hours, days, or as long as your plan allows. A rotating 4G/5G proxy swaps the IP automatically, either on a timer or after every request, pulling a new address from the carrier's CGNAT pool each time.
Choose a static setup when the target site needs to recognize you as the same visitor across multiple requests: logging into an account, completing a multi-step checkout, or building session history on a platform that flags sudden IP changes mid-session. Dedicated mobile proxies are naturally suited to this because the IP is already reserved for your account alone.
Choose rotating when you are collecting data across many pages or accounts and want each request treated as a fresh visitor. Rotating setups spread requests across more IPs, which lowers the chance that any single address gets rate-limited. KnoxProxy lets you run a dedicated mobile proxy in the United States with either a fixed session or scheduled rotation, so you are not locked into one mode for the whole subscription.
Connecting to a dedicated mobile proxy uses the same HTTP or SOCKS5 credentials as any other KnoxProxy plan, just pointed at your reserved gateway endpoint instead of a shared one.
1. Open your KnoxProxy dashboard and copy the gateway host, port, username, and password for your dedicated mobile proxy. 2. In your browser, enter these details under the manual proxy configuration settings, or use a proxy-switching extension if you need to toggle it on and off. 3. In your application code, pass the same credentials as a proxy URL instead of hardcoding a new one for every environment. 4. Send a test request to confirm the exit IP matches your dedicated mobile connection before running your full workload.
import requests
proxy = "http://USER:PASS@gw.knoxproxy.com:7000"
response = requests.get("https://httpbin.org/ip", proxies={"https": proxy})
print(response.json())If the returned IP does not change between requests, your dedicated mobile proxy is holding its session correctly. If you need a new IP, trigger a rotation from your dashboard rather than waiting for the carrier to reassign one on its own.
Ready to put this into practice? Browse Dedicated Mobile Proxies
KnoxProxy Research Team · Technical Content
Network engineers and proxy infrastructure specialists with 10+ years in anti-bot systems, web scraping, and IP routing.
90.4M+ ethically sourced residential IPs across 195 countries. Instant activation, 14-day money-back guarantee.